Errata exists for this version of the document.
The third example provides a more complex Query in which the results are filtered on multiple criteria.
Example 3: Get PersonType.LastName, AnimalType.Name, ScheduleType.Period where a person has a pet and the animal has a feeding schedule and the person has a Zipcode = ‘02138’ and (the Schedule.Period is Daily or Hourly) and Amount to feed is > 10.
Table B.9 describes the NodeTypeDescription parameters used in the example.
Table B.9 – Example 3 - NodeTypeDescription
|
Type Definition Node |
Include Subtypes |
QueryDataDescription |
||
|
|
|
RelativePath |
Attribute |
Index Range |
|
PersonType |
FALSE |
“12:LastName” |
Value |
N/A |
|
|
|
“<12:HasPet>12:AnimalType. 12:Name” |
Value |
N/A |
|
|
|
“<12:HasPet>12:AnimalType<12:HasSchedule> 12:FeedingSchedule.Period” |
Value |
N/A |
The corresponding ContentFilter is illustrated in Figure B.7.
Figure B.7 – Example 3 Filter Logic Tree
Table B.10 describes the elements, operators and operands used in the example.
Table B.10 – Example 3 ContentFilter
|
Element[] |
Operator |
Operand[0] |
Operand[1] |
Operand[2] |
Operand[3] |
|
0 |
And |
Element Operand= 1 |
ElementOperand = 2 |
|
|
|
1 |
And |
ElementOperand = 4 |
ElementOperand = 6 |
|
|
|
2 |
And |
ElementOperand = 3 |
ElementOperand = 9 |
|
|
|
3 |
Or |
ElementOperand = 7 |
ElementOperand = 8 |
|
|
|
4 |
RelatedTo |
AttributeOperand = NodeId: 12:PersonType, BrowsePath “.”, Attribute: NodeId |
ElementOperand = 5 |
AttributeOperand = NodeId: 12:HasPet, BrowsePath “.”, Attribute: NodeId |
LiteralOperand = ‘1’ |
|
5 |
RelatedTo |
AttributeOperand = Node: 12:AnilmalType, BrowsePath “.”, Attribute: NodeId Alias: AT |
AttributeOperand = NodeId: 12:FeedingScheduleType, BrowsePath “.”, Attribute: NodeId Alias: FST |
AttributeOperand = NodeId: 12:HasSchedule, BrowsePath “.”, Attribute: NodeId |
LiteralOperand = ‘1’ |
|
6 |
Equals |
AttributeOperand = NodeId: 12:PersonType BrowsePath 12:Zipcode “.”, Attribute: Value |
LiteralOperand = ‘02138’ |
|
|
|
7 |
Equals |
AttributeOperand = NodeId: 12:PersonType BrowsePath “12:HasPet>12:AnimalType<12:HasSchedule>12: FeedingSchedule/12:Period”, Attribute: Value Alias: FST |
LiteralOperand = ‘Daily’ |
|
|
|
8 |
Equals |
AttributeOperand = NodeId: 12:PersonType BrowsePath “12:HasPet>12:AnimalType<12:HasSchedule>12: FeedingSchedule/12:Period”, Attribute: Value Alias: FST |
LiteralOperand = ‘Hourly’ |
|
|
|
9 |
Greater Than |
AttributeOperand = NodeId: 12:PersonType BrowsePath “12:HasPet>12:AnimalType<12:HasSchedule>12: FeedingSchedule/12:Amount”, Attribute: Value Alias: FST |
ElementOperand = 10 |
|
|
|
10 |
Cast |
LiteralOperand = 10 |
AttributeOperand = NodeId: Int32, BrowsePath “.”, Attribute: NodeId |
|
|
The results from this query would contain the QueryDataSets shown in Table B.11.
Table B.11 – Example 3 QueryDataSets
|
NodeId |
TypeDefinition NodeId |
RelativePath |
Value |
|
12:30 (JFamily1) |
PersonType |
“.12:LastName” |
Jones |
|
|
|
“<12:HasPet>12:PersonType. 12:Name” |
Rosemary |
|
|
|
|
Basil |
|
|
|
“<12:HasPet>12:AnimalType<12:HasSchedule>12:FeedingSchedule. 12:Period” |
Hourly |
|
|
|
|
Daily |
NOTE The RelativePath column and browse name (in parentheses in the NodeId column) are not in the QueryDataSet and are only shown here for clarity. The TypeDefinition NodeId would be an integer not the symbolic name that is included in the table.