This OPC UA Interface defines the basis of an IETF network interface. The IIetfBaseNetworkInterfaceType is formally defined in Table 1.

Table 1 – IIetfBaseNetworkInterfaceType definition

Attribute

Value

BrowseName

IIetfBaseNetworkInterfaceType

IsAbstract

True

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

Subtype of the BaseInterfaceType defined in OPC 10000-5

HasComponent

Variable

AdminStatus

InterfaceAdminStatus

BaseDataVariableType

Mandatory

HasComponent

Variable

OperStatus

InterfaceOperStatus

BaseDataVariableType

Mandatory

HasComponent

Variable

PhysAddress

String

BaseDataVariableType

Optional

HasComponent

Variable

Speed

UInt64

AnalogUnitType

Mandatory

Conformance Units

BNM Ethernet Base Info

AdminStatus of DataType InterfaceAdminStatus specifies the desired state of the network interface. This Variable has the same read semantics as ifAdminStatus (see IETF RFC 2863: The Interfaces Group MIB - ifAdminStatus). The InterfaceAdminStatus Enumeration is defined in 5.3.1.2.

OperStatus of DataType InterfaceOperStatus specifies the current operational state of the network interface. This Variable has the same semantics as ifOperStatus (see IETF RFC 2863: The Interfaces Group MIB - ifOperStatus). The InterfaceOperStatus Enumeration is defined in 5.3.1.3.

PhysAddress of DataType String specifies the network interface's address at its protocol sub-layer. For example, for an 802.x network interface, this parameter normally contains a Media Access Control (MAC) address. The network interface's media-specific modules must define the bit and byte ordering and the format of the value of this object. For network interfaces that do not have such an address (e.g., a serial line), this node is not present (see IETF RFC 2863: The Interfaces Group MIB - ifPhysAddress).

Speed of DataType UInt64 specifies an estimate of the network interface's current bandwidth in bits per second. For network interfaces that do not vary in bandwidth or for those where no accurate estimation can be made, this value should contain the nominal bandwidth (see IETF RFC 2863: ifSpeed, ifHighSpeed).

The component Variables of the IIetfBaseNetworkInterfaceType have the Attribute values defined in Table 2.

Table 2 – IIetfBaseNetworkInterfaceType Attribute values for child Nodes

Source Path

Value Attribute

Description Attribute

Speed

EngineeringUnits

NamespaceUri: http://www.opcfoundation.org/UA/units/un/cefact

UnitId: 4337968DisplayName: bit/sDescription: bit per second

-