This Structure DataType is used to represent the extended PubSub configuration of an OPC UA Application. It is a subtype of the PubSubConfigurationDataType defined in 6.2.12.1.

The PubSubConfiguration2DataType is formally defined in Table 79.

Table 79 – PubSubConfiguration2DataType structure

Name

Type

Description

PubSubConfiguration2DataType

Structure

Subtype of PubSubConfigurationDataType defined in 6.2.12.1.

SubscribedDataSets

StandaloneSubscribed‌DataSetDataType[]

The standalone SubscribedDataSets contained in the configuration. The StandaloneSubscribedDataSetDataType is defined in 6.2.10.5.

DataSetClasses

DataSetMeta‌DataType[]

DataSetClasses supported by the Publisher.

DefaultSecurityKeyServices

EndpointDescription[]

The default SecurityKeyServices used for the PubSub configuration. The value is as default if not overwritten in the groups or DataSetReaders. The general definition for the SecurityKeyServices parameter is in .6.2.5.4.

SecurityGroups

SecurityGroupDataType[]

The SecurityGroups contained in the configuration. The SecurityGroupDataType is defined in 6.2.12.2.

PubSubKeyPushTargets

PubSubKeyPushTarget DataType[]

The PubSubKeyPushTargets contained in the configuration. The PubSubKeyPushTargetDataType is defined in 6.2.12.3.

ConfigurationVersion

VersionTime

The ConfigurationVersion reflects the time of the last change.

ConfigurationProperties

KeyValuePair[]

The configurationProperties is an array of DataType KeyValuePair that specifies additional properties for the PubSub configuration. The KeyValuePair type is defined in OPC 10000-5 and consists of a QualifiedName and a value of BaseDataType.

The mapping of the namespace, name, and value to concrete functionality may be defined by transport protocol mappings, future versions of this document or vendor-specific extensions.

Its representation in the AddressSpace is defined in Table 80.

Table 80 – PubSubConfiguration2DataType definition

Attributes

Value

BrowseName

PubSubConfiguration2DataType

IsAbstract

False

Subtype of PubSubConfigurationDataType defined in 6.2.12.1.

Conformance Units

PubSub Parameters Configuration2