Annex C (normative) UADP Header Layouts ToC

C.3 Message headers for Events and Data with dynamic layout ToC Previous

C.3.4 Header layout for NetworkMessages ToC Previous Next

A UADP NetworkMessage header shall consist of the following fields according to this header layout:

  • Version/Flags
  • ExtendedFlags1
  • PublisherId
  • PayloadHeader Additional restrictions:

  • The datatype for the PublisherId shall be UInt64 Note: For the PublisherId the DataType UInt64 was selected because it allows a simple way for a Publisher to generate unique PublisherIds by using the local MAC address (48 Bit) as part of the PublisherId.

The NetworkMessage header layout is shown in Figure C.7.

readme_files/image009.png Figure C.7 : UADP NetworkMessage header layout

Table C.7 shows the configuration for the NetworkMessage header.

Table C.7 : UADP NetworkMessage header layout

Name Type Restrictions
UADPVersion Bit[0-3] The version shall be 1
UADPFlags Bit[4-7]    Bit 4: PublisherId enabled   Bit 5: GroupHeader disabled   Bit 6: PayloadHeader enabledBit 7: ExtendedFlags1 enabled
ExtendedFlags1 Byte    Bit range 0-2: PublisherId Type      011 The PublisherId is of DataType UInt64   Bit 3: DataSetClassId disabled   Bit 4: Security disabled   Bit 5: Timestamp disabled   Bit 6: PicoSeconds disabledBit 7: ExtendedFlags2 disabled
PublisherId UInt64    Configured value for the PubSubConnection.The datatype shall be UInt64.
PayloadHeader Byte[*] Defined by Table 80

Table C.8 defines the values for the configuration parameters representing this layout.

Table C.8 : Values for configuration parameters

Parameter Value
UadpNetworkMessageContentMask    0x00000041      This value results of the following options:   Bit 0: PublisherId enabledBit 6: PayloadHeader enabled

When a PubSubConnection is created by using the Method AddConnection() the element PublisherId contained in the argument PubSubConnectionDataType shall be of the DataType UInt64.

Previous Next