Figure 14 shows an overview of the object types for the Pressure Cooking Kettle device class.

Figure 14 — Overview of objects types for Pressure Cooking Kettle

Various cooking processes are possible with a pressure cooking kettle; these include:

—Gently bring to boil;

—Cooking with various power and simmering stages;

—Pressure cooking;

—Keeping warm.

In addition, an agitator can be used.

PressureCookingKettleParameterType provides information about the state of the device, the set values and the current actual values.

The PressureCookingKettleParameterType is formally defined in Table 29.

Table 29 — PressureCookingKettleParameterType definition

Attribute	Value
BrowseName	PressureCookingKettleParameterType
IsAbstract	False
References		NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule AccessLevel
Subtype of KitchenDeviceParameterType
HasComponent		Variable	ProgramMode	PressureCookingKettle ModeEnumeration	BaseDataVariableType	M, R
HasComponent		Variable	CookingLevel	Int32	BaseDataVariableType	M, R
HasComponent		Variable	SetTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	SetProcessTime	Int32	AnalogItemType	M, R
HasComponent		Variable	TimeRemaining	Int32	AnalogItemType	M, R
HasComponent		Variable	SetCoreTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualCoreTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualPressureAbsolute	Float	AnalogItemType	M, R
HasComponent		Variable	ActualPressureKettle	Float	AnalogItemType	M, R
HasComponent		Variable	SignalMode	SignalModeEnumeration	BaseDataVariableType	M, R
HasComponent		Variable	IsLidLocked	Boolean	BaseDataVariableType	M, R
HasComponent		Variable	IsSteamActive	Boolean	BaseDataVariableType	M, R
HasComponent		Variable	IsOpenExpressActive	Boolean	BaseDataVariableType	O, R

This variable describes the state of the device, e.g. heating up, frying.

The data type for the PressureCookingKettleModeEnumeration is defined in section 10.4.1.

This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the set process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the remaining process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the set core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the current absolute pressure in the cooking chamber.

The EngineeringUnit property of the AnalogItemType has the value mbar. The value for the EURange property is device-specific.

This variable describes the current absolute pressure in the steam chamber.

The EngineeringUnit property of the AnalogItemType has the value mbar. The value for the EURange property is device-specific.

This variable describes the state of the signal output. In addition to the on and off states, the "Signal was acknowledged" state is also saved.

The data type for the SignalModeEnumeration is defined in 10.4.2.

This variable describes whether the lid is locked.

This variable describes whether the use of low-pressure steam is active.

This variable describes whether the express pressure relief is active.

PressureCookingKettleDeviceType describes a device from the PressureCookingKettle device class.

The PressureCookingKettleDeviceType is formally defined in Table 30.

Table 30 — PressureCookingKettleDeviceType definition

Attribute	Value
BrowseName	PressureCookingKettleDeviceType
IsAbstract	False
References		NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule AccessLevel
Subtype of CommercialKitchenDeviceType
HasProperty		Variable	EnergySource	EnergySourceEnumeration	PropertyType	M, R
HasComponent		Object	PressureCookingKettle		PressureCookingKettleParameterType	M, R

The EnergySource property returns the type of energy supply. The data type for the EnergySourceEnumeration is defined in 21.1.

The PressureCookingKettle object contains the parameters for a device of the type PressureCookingKettle.

The data type is an enumeration of the current status of the device.

The enumeration values are defined in Table 31.

Table 31 — PressureCookingKettleModeEnumeration values

Value	Description
Off_0	off
Preheat_1	Heating up
SoftCook_2	Gently bring to boil
Cook_3	Bring to boil with 3 simmering stages
CookSlow_4	Boiling with 3 power stages
Pressure_5	Pressure cooking
KeepWarming_6	Keeping warm
PresetStart_7	Start time preselection active
Error_8	Error state

This data type is an enumeration of the signal state.

The enumeration values are defined in Table 32.

Table 32 — SignalModeEnumeration values

Value	Description
SignalOff_0	Signal switched off
SignalOn_1	Signal switched on
SignalAck_2	Signal acknowledged