DryerOperatingStateEnum 
The fields of the DryerOperatingStateEnum DataType are defined in the following table:
| Name | Value | Description |
|---|---|---|
| Other | 0 | The dryer is in a state not specified by this enumeration. |
| Stopped | 1 | The dryer is stopped. This state is applicable to all adsorption dryers. |
| Running | 2 | The dryer is running. This state is applicable to all dryers. |
| RefrigerantCompressorStopped | 3 | The compressor of the refrigerant circuit is standing still, and the refrigerant dryer is operating using the stored cold. This state is applicable to refrigerant dryers. |
| RefrigerantCompressorRunning | 4 | The compressor of the refrigerant circuit is running and compressing refrigerant, creating cold. This state is applicable to refrigerant dryers. |
| PurgeValveClosed | 5 | Purge valve is closed, and no purge air is consumed, no purge of the humidity from membranes dryer. This state is applicable to membrane dryers. |
| PurgeValveOpen | 6 | Purge air can flow to purge the humidity out of the membrane dryer. This state is applicable to membrane dryers. |
| ParallelModeOfBothVessels | 7 | Both vessels of the adsorption dryer are used in parallel for adsorption. This state is applicable to all adsorption dryers. |
| Depressurizing | 8 | One vessel of the adsorption dryer is depressurized for regeneration. This state is applicable to heatless and heated adsorption dryers, not HOC. |
| Desorbing | 9 | One vessel of the adsorption dryer is in desorption phase, using purge or ambient air, heated or not heated. This state is applicable to all adsorption dryers. |
| Cooling | 10 | One vessel of the adsorption dryer is being cooled after being heated in the previous desorption phase. This state is applicable to heated adsorption dryers and HOC. |
| Pressurizing | 11 | The depressurized vessel is pressurized again. This state is applicable to heatless and heated adsorption dryers, not HOC. |
| RegeneratedVesselInStand-by | 12 | The regenerated vessel is in standby and ready for adsorption phase. This state is applicable to all adsorption dryers. |
The representation of the DryerOperatingStateEnum DataType in the address space is shown in the following table:
| Name | Attribute |
|---|---|
| NodeId | ns=1;i=3026 |
| NamespaceUri | http://opcfoundation.org/UA/CAS/ |
| BrowseName | DryerOperatingStateEnum |
| IsAbstract | False |
| SubtypeOf | Enumeration |
| Categories |
The references from the DryerOperatingStateEnum DataType Node are shown in the following table:
| Reference | NodeClass | BrowseName | DataType | TypeDefinition | ModellingRule |
|---|---|---|---|---|---|
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | Mandatory |