OperationModeEnum TOC Previous Next Specification

describes the possible operation modes of the pump.

The fields of the OperationModeEnum DataType are defined in the following table:

Name Value Description
AutoControl 0 standard control algorithm, not configurable.
ClosedLoopStandardPID 1 pid algorithm, control parameters configurable in functional element ControlPID.
Advanced 2 manufacturer specific control algorithm, control parameters configurable.
StandBy 3 ready for operation .
OpenLoopMin 4 open loop operation at minimum characteristic.
OpenLoopValue 5 open loop operation at set point value.
OpenLoopMax 6 open loop operation at maximum characteristic.
ClosedLoopMin 7 closed loop operation at minimum characteristic.
ClosedLoopMax 8 closed loop operation at maximum characteristic.
Test 9 Test operation.
Calibration 10 Calibration mode.

The representation of the OperationModeEnum DataType in the address space is shown in the following table:

Name Attribute
NodeId ns=1;i=3007
NamespaceUri http://opcfoundation.org/UA/Pumps/
BrowseName OperationModeEnum
IsAbstract False
SubtypeOf Enumeration
Categories  

The references from the OperationModeEnum DataType Node are shown in the following table:

Reference NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable EnumValues EnumValueType[] PropertyType Mandatory