ComponentStatusEnumeration TOC Previous Next Specification

Actual status of the component provides a minimal error handling for devices without event support.

The fields of the ComponentStatusEnumeration DataType are defined in the following table:

Name Value Description
GOOD 0 Component has no error or warning.
WARNING 1 The component has an undefined warning, but no need to stop the production.
WARNING_PRESSURE_TOO_HIGH 2 Pressure is too high. No need to stop the process but influence to the part quality.
WARNING_PRESSURE_TOO_LOW 3 Pressure is too low. No need to stop the process but influence to the part quality.
ADVANCE_WARNING_DRUM_CHANGE 4 Warning, barrel change is imminent. No need to stop the process.
ERROR_DRUM_EMPTY 5 Drum of the component is empty. Production need to be stopped.
ERROR 6 The component has an error and process needs to be stopped.

The representation of the ComponentStatusEnumeration DataType in the address space is shown in the following table:

Name Attribute
NodeId ns=1;i=3003
NamespaceUri http://opcfoundation.org/UA/PlasticsRubber/LDS/
BrowseName ComponentStatusEnumeration
IsAbstract False
SubtypeOf Enumeration
Categories  

The references from the ComponentStatusEnumeration DataType Node are shown in the following table:

Reference NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable EnumValues EnumValueType[] PropertyType Mandatory