7 ExtrusionLine_InterfaceType ToC Previous Next

7.1 ExtrusionLine_InterfaceType Definition ToC Previous Next

This OPC UA ObjectType is used for the root Object representing an extrusion line as overall system. It is formally defined in Table 1.

The instance(s) of ExtrusionLine_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: In most cases the OPC UA server will be implemented in the line control of the extrusion line so only one instance of ExtrusionLine_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several extrusion lines as one interface to the MES. In this case several instances of ExtrusionLine_InterfaceType will be created.

readme_files/image005.gif Figure 1 – ExtrusionLine_MES_InterfaceType Overview

Table 1 – ExtrusionLine_InterfaceType Definition

Attribute Value        
BrowseName ExtrusionLine_InterfaceType        
IsAbstract False        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 0:BaseObjectType defined in OPC UA Part 5          
0:HasProperty Variable LineId String 0:PropertyType M, RW
0:HasProperty Variable LineStatus ProductionStatus Enumeration 0:PropertyType M
0:HasComponent Object MachineInformation   3:MachineInformationType M
0:HasComponent Object MachineConfiguration   3:MachineConfigurationType M
0:HasComponent Object MachineMESConfiguration   3:MachineMESConfigurationType M
0:HasComponent Object MESMessage   3:MESMessageType O
0:HasComponent Method SetMESMessage     O
0:HasComponent Method ClearMESMessage     O
0:HasComponent Object Users   3:UsersType M
0:HasProperty Variable ConfigurationParameters Configuration ParameterType[] 0:PropertyType M, RO
0:HasComponent Object MaterialList   3:MaterialListType M
0:HasComponent Object ProductionParameters   ProductionParametersType M
0:HasComponent Object JobGroups   JobGroupsType O
0:HasComponent Object ProductionDataset Management   3:ProductionDataset ManagementType O
0:GeneratesEvent ObjectType 3:LogbookEventType Defined in OPC 40083    
0:GeneratesEvent ObjectType 3:MessageConditionType Defined in OPC 40083    

The BrowseName of the object instance shall be “ExtrusionLine_<Manufacturer>_<SerialNumber>”

Example: “ExtrusionLine_battenfeld_4”.

Previous Next