This OPC UA ObjectType is used for the root Object representing a calibrator as part of an extrusion line. It is based on the ExtrusionDeviceType (defined in OPC 40084-1) and formally defined in Table 1.

The instance(s) of Calibrator_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: If the OPC UA server is implemented in the control of the calibrator so only one instance of Calibrator_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several machine controls as one interface to the MES. In this case several instances of Calibrator_InterfaceType will be created.

Figure 1 – Calibrator_InterfaceType Overview

Table 1 – Calibrator_InterfaceType Definition

Attribute	Value
BrowseName	Calibrator_InterfaceType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 4:ExtrusionDeviceType (defined in OPC 40084-1)
0:HasComponent	Object	PositionZ		3:MeasuringDeviceType	O
0:HasComponent	Object	PositionsX		3:MeasuringDevicesType	O
0:HasComponent	Object	PositionsY		3:MeasuringDevicesType	O
0:HasComponent	Object	PositionsPipeSupport		3:MeasuringDevicesType	O
0:HasComponent	Object	CalibrationZones		CalibrationZonesType	M

The BrowseName of the object instance shall be "Calibrator_<Manufacturer>_<SerialNumber>"

Example: "Calibrator_battenfeld_0123456".