8 Machine Identification and Nameplate ToC Previous Next

8.1 Overview ToC Previous Next

This building block provides the capabilities to globally uniquely identify a Machine and have access to vendor-defined information about the Machine and manage user-specific information for the identification of the Machine. Figure 7 gives an overview. The Interface IMachineryItemVendorNameplateType and the ObjectType MachineryItemIdentificationType are generic ObjectTypes introduced to be used in other use cases. The AddIn MachineIdentificationType with the default name “2:Identification” (as defined in OPC 10000-100), is derived from the MachineryItemIdentificationType and thus indirectly from the 2:FunctionalGroupType and implements the interfaces IMachineVendorNameplateType and IMachineTagNameplateType. IMachineVendorNameplateType is a subtype of IMachineryItemVendorNamesplateType and thus indirectly from the 2:IVendorNameplateType defined in OPC 10000-100. IMachineryItemVendorNamesplateType refines the usage of the Properties defined in 2:IVendorNameplateType, changes some to Mandatory and defines additional Properties. IMachineVendorNameplateType uses those definitions and makes another Property mandatory. IMachineTagNameplateType is a subtype of the 2:ITagNameplateType defined in OPC 10000-100 and refines the usage of the Properties defined in that interface, and defines an additional Property.

readme_files/image012.png

Figure 7 – Building Block for Identification and Nameplate

Previous Next