5 Model ToC Previous Next

5.8 Data Types ToC Previous Next

5.8.2 Enumerations ToC Previous Next

5.8.2.1 Introduction ToC

Enumeration is used to represent a Parameter value that has a limited set of possible numeric values, each of which has a descriptive name. All Parameters of this kind are instances of DataItemType VariableType. The following definitions describe the values of the EnumString Property for those Parameters for the English locale (LocaleId=en).

5.8.2.2 ExecutionCycleEnumeration Type ToC

ExecutionCycleEnumeration describes the type of acquisition cycle performed on a stream, in progress or completed.

Table 88 – ExecutionCycleEnumeration states

Seq. number EnumString Description
0 IDLE_0 No acquisition cycle in progress
1 DIAGNOSTIC_1 Diagnostic cycle
2 CLEANING_2 Cleaning cycle
3 CALIBRATION_4 Calibration cycle
4 VALIDATION_8 Validation cycle
5 SAMPLING_16 Normal Sample acquisition cycle
6 DIAGNOSTIC_WITH_GRAB_SAMPLE_32769 Diagnostic cycle with grab sample operation
7 CLEANING_WITH_GRAB_SAMPLE_32770 Cleaning cycle with grab sample operation
8 CALIBRATION_WITH_GRAB_SAMPLE_32772 Calibration cycle with grab sample operation
9 VALIDATION_WITH_GRAB_SAMPLE_32776 Validation cycle with grab sample operation
10 SAMPLING_WITH_GRAB_SAMPLE_32784 Normal Sample acquisition cycle with grab sample operation

When an ExecutionCycle with sequence number 6 through 10 (GRAB_SAMPLE) is selected, the operator or a system can grab a sample and send it to a control lab for analysis.

5.8.2.3 AcquisitionResultStatusEnumeration Type ToC

AcquisitionResultStatusEnumeration describes acquisition result status on the Stream (general quality of the acquired data).

Table 89 – AcquisitionResultStatusEnumeration states

Seq. number EnumString Description
0 NOT_USED_0 No longer used.
1 GOOD_1 The acquisition has been completed as requested without any error.
2 BAD_2 The acquisition has been completed as requested with error.
3 UNKNOWN_3 The acquisition has been completed but nothing can be said about the quality of the result.
4 PARTIAL_4 The acquisition has been partially completed as requested without any error. For example, an averaging of 30 spectra as been requested, but the user terminates the acquisition after averaging 20 spectra.

Previous Next