This enumeration WSProgramEnumerationType defines programs according to the Weihenstephan Standards. The WS DataPoint WS_Cur_Prog uses the WSProgramEnumerationType as data type and is defined as follows: Machine programs according to the Weihenstephan Standards.
The enumeration is defined in Table 26.
Table 26 – WSProgramEnumerationType Items
|Undefined (No Program)||0||The machine is switched on, but no program for a special application function has been selected yet or this machine is not needed.|
|Production||1||The machine functioning according to its specification.|
|Start Up||2||The machine is in the production start-up phase. This includes for example heating up or waiting for products.|
|Run Down||4||The machine is at the end of production and runs the machine empty.|
|Clean||8||A cleaning program is executed in the machine.|
|Changeover||16||The machine is changed over manually or automatically for the next product depending on parameters.|
|Maintenance||32||Maintenance and service work is performed on the machine.|
|Break||64||The machine is in a planned break.|
Its representation in the AddressSpace is defined in Table 27.
Table 27 – WSProgramEnumerationType Definiton
|Subtype of the Enumeration type defined in OPC 10000-5|