The ComponentName property provides a user writeable name provided by the vendor, integrator or user of the device. The ComponentName may be a default name given by the vendor. This property is defined by ComponentType defined in OPC UA DI.

EmergencyStopFunctions is a container for one or more instances of the EmergencyStopFunctionType. The number and names of emergency stop functions is vendor specific. When provided, this object contains a list of all emergency stop functions with names and current state. See description of EmergencyStopFunctionType for examples of emergency stop functions.

Table 29 – TypeDefinition of EmergencyStopFunctions of SafetyStateType

Attribute	Value
BrowseName	EmergencyStopFunctions
References	NodeClass	BrowseName	DataType	TypeDefinition	Modelling Rule
HasComponent	Object	<EmergencyStopFunctionIdentifier>		EmergencyStopFunctionType	Mandatory Placeholder

Table 30 – ObjectType EmergencyStopFunctionType

Attribute	Value
BrowseName	EmergencyStopFunctionType
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
Subtype of the BaseObjectType defined in OPC Unified Architecture
HasProperty	Variable	Name	String	PropertyType	Mandatory
HasComponent	Variable	Active	Boolean	BaseDataVariableType	Mandatory

Description of EmergencyStopFunctionType:

According to ISO 10218-1:2011 Ch.5.5.2 Emergency stop the robot shall have one or more emergency stop functions.

• The Name of the EmergencyStopFunctionType provides a manufacturer-specific emergency stop function identifier within the safety system.

The only named emergency stop function in the ISO 10218-1:2011 standard is the "Pendant emergency stop function". Other than that, the standard does not give any indication on naming of emergency stop functions.

• The Active variable is TRUE if this particular emergency stop function is active, e.g. that the emergency stop button is pressed, FALSE otherwise.

ProtectiveStopFunctions is a container for one or more instances of the ProtectiveStopFunctionType. The number and names of protective stop functions is vendor specific. When provided, this object contains a list of all protective stop functions with names and current state. See description of ProtectiveStopFunctionType for examples of protective stop functions.

Table 31 – TypeDefinition of ProtectiveStopFunctions of SafetyStateType

Attribute	Value
BrowseName	ProtectiveStopFunctions
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
HasComponent	Object	<ProtectiveStopFunctionIdentifier>		ProtectiveStopFunctionType	Mandatory Placeholder

Table 32 – ObjectType ProtectiveStopFunctionType

Attribute	Value
BrowseName	ProtectiveStopFunctionType
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
Subtype of the BaseObjectType defined in OPC Unified Architecture
HasProperty	Variable	Name	String	PropertyType	Mandatory
HasComponent	Variable	Enabled	Boolean	BaseDataVariableType	Mandatory
HasComponent	Variable	Active	Boolean	BaseDataVariableType	Mandatory

Description of ProtectiveStopFunctionType:

According to ISO 10218-1:2011 Ch.5.5.3 the robot shall have one or more protective stop functions designed for the connection of external protective devices.

• The Name of the ProtectiveStopFunctionType provides a manufacturer-specific protective stop function identifier within the safety system.
• The Enabled variable is TRUE if this protective stop function is currently supervising the system, FALSE otherwise. A protective stop function may or may not be enabled at all times, e.g. the protective stop function of the safety doors are typically enabled in automatic operational mode and disabled in manual mode. On the other hand for example, the protective stop function of the teach pendant enabling device is enabled in manual modes and disabled in automatic modes.
• The Active variable is TRUE if this particular protective stop function is active, i.e. that a stop is initiated, FALSE otherwise. If Enabled is FALSE then Active shall be FALSE.

Examples

The table below shows an example with a door interlock function. In this example, the door is only monitored during automatic modes. During manual modes, the operators may open the door without causing a protective stop.

Table 33 – Door Interlock Protective Stop Example

	Automatic Mode		Manual Mode
Door interlock	Enabled	Active	Enabled	Active
Door closed	TRUE	FALSE	FALSE	FALSE
Door open	TRUE	TRUE	FALSE	FALSE

The next example shows how the three-position enabling device normally found on teach pendants is processed. In this case it does not matter if the enabling device is pressed or not during automatic modes, while in manual modes, a protective stop is active as long as the enabling device is released or fully pressed.

Table 34 – Teach Pendant Enabling Device Protective Stop Example

	Automatic Mode		Manual Mode
Teach Pendant Enabling Device	Enabled	Active	Enabled	Active
Released	FALSE	FALSE	TRUE	TRUE
Middle position	FALSE	FALSE	TRUE	FALSE
Fully pressed (panic)	FALSE	FALSE	TRUE	TRUE

Table 35 – ParameterSet of SafetyStateType

Attribute	Value
BrowseName	ParameterSet
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
HasComponent	Variable	OperationalMode	OperationalModeEnumeration	BaseDataVariableType	Mandatory
HasComponent	Variable	EmergencyStop	Boolean	BaseDataVariableType	Mandatory
HasComponent	Variable	ProtectiveStop	Boolean	BaseDataVariableType	Mandatory

Description of ParameterSet of SafetyStateType:

• Variable OperationalMode: The OperationalMode variable provides information about the current operational mode. Allowed values are described in OperationalModeEnumeration, see ISO 10218-1:2011 Ch.5.7 Operational Modes.
• Variable EmergencyStop: The EmergencyStop variable is TRUE if one or more of the emergency stop functions in the robot system are active, FALSE otherwise. If the EmergencyStopFunctions object is provided, then the value of this variable is TRUE if one or more of the listed emergency stop functions are active.
• Variable ProtectiveStop: The ProtectiveStop variable is TRUE if one or more of the enabled protective stop functions in the system are active, FALSE otherwise. If the ProtectiveStopFunctions object is provided, then the value of this variable is TRUE if one or more of the listed protective stop functions are enabled and active.

Table 36 – OperationalModeEnumeration

OperationalModeEnumeration
EnumString	Value	Description
OTHER	0	This value is used when there is no valid operational mode. Examples are: - During system-boot - The system is not calibrated (and hence can not verify cartesian position values) - There is a failure in the safety system itself
MANUAL_REDUCED_SPEED	1	"Manual reduced speed" - name according to ISO 10218-1:2011
MANUAL_HIGH_SPEED	2	"Manual high speed" - name according to ISO 10218-1:2011
AUTOMATIC	3	"Automatic" - name according to ISO 10218-1:2011
AUTOMATIC_EXTERNAL	4	"Automatic external" - Same as "Automatic" but with external control, e.g. by a PLC