7 Cutter_InterfaceType ToC Previous Next

7.1 Cutter_InterfaceType Definition ToC Previous Next

This OPC UA ObjectType is used for the root Object representing a haul-off as part of an extrusion line. It is based on the ExtrusionDeviceType (defined in OPC 80084-1) and formally defined in Table 1.

The instance(s) of Cutter_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: If the OPC UA server is implemented in the control of the cutter so only one instance of Cutter_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several machine controls as one interface to the MES. In this case several instances of Cutter_InterfaceType will be created.

readme_files/image005.gif Figure 1 – Cutter_InterfaceType Overview

Table 1 – Cutter_InterfaceType Definition

Attribute Value        
BrowseName Cutter_InterfaceType        
IsAbstract False        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 4:ExtrusionDeviceType (defined in OPC 40084-1)          
0:HasComponent Object ProductSpeed   3:MonitoredParameterType O
0:HasComponent Object CuttingProducts   CuttingProductsType M
0:HasComponent Variable SideClampClosed 0:Boolean 0:BaseDataVariableType O
0:HasComponent Object CuttingProgram   3:StartDeviceType O
0:HasComponent Method ManualCut     O
0:HasComponent Method SampleCut     O
0:HasComponent Variable SampleCuttingLength 0:Double 0:AnalogUnitType O, RW
0:HasComponent Variable WasteIndicator 0:Boolean 0:BaseDataVariableType O, RW
0:HasComponent Variable WasteCuttingLength 0:Double 0:AnalogUnitType O, RW
0:HasComponent Variable TotalWasteLength 0:Double 0:AnalogUnitType O, RO
0:GeneratesEvent ObjectType CutEventType      

The BrowseName of the object instance shall be “Cutter_<Manufacturer>_<SerialNumber>”

Example: “Cutter_Weber_0123456”.

Previous Next