This Object is a container for the calibration zones but gives also information about the total water flow and water temperature.

image008.gif

Figure 3 – CalibrationZonesType Overview

Table 2 – CalibrationZonesType Definition

Attribute

Value

BrowseName

CalibrationZonesType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of 0:BaseObjectType defined in OPC UA Part 5

0:HasProperty

Variable

0:NodeVersion

0:String

0:PropertyType

M, RO

0:HasComponent

Object

WaterFlowIn

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterFlowOut

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterTemperatureIn

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterTemperatureOut

3:MeasuringDeviceType

O

0:HasComponent

Object

CalibrationZone_<Nr>

CalibrationZoneType

OP

0:GeneratesEvent

ObjectType

GeneralModelChangeEventType

In and out Flow rate (in volume per time) of the water in the calibration zone. The used MeasuringDeviceType is defined in OPC 40083.

In and out temperature of the water in the calibration zone. The used MeasuringDeviceType is defined in OPC 40083.

This Object represents information about a single calibration zone.

Table 3 – CalibrationZoneType Definition

Attribute

Value

BrowseName

CalibrationZoneType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of 0:BaseObjectType defined in OPC UA Part 5

0:HasProperty

Variable

Name

0:LocalizedText

0:PropertyType

M, RW

0:HasProperty

Variable

Position

0:String

0:PropertyType

O, RO

0:HasProperty

Variable

IsPresent

0:Boolean

0:PropertyType

M, RO

0:HasComponent

Object

VacuumPumps

3:DrivesType

O

0:HasComponent

Object

WaterPumps

3:DrivesType

O

0:HasComponent

Object

Vacuum

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterTemperature

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterFlow

3:MeasuringDeviceType

O

0:HasComponent

Object

WaterLevel

3:MeasuringDeviceType

O

0:HasComponent

Object

AirShowerPressure

3:MeasuringDeviceType

O

0:HasComponent

Object

AdditionalMeasuringDevices

3:MeasuringDevicesType

O

Name of the calibration zone.

Position of the calibration zone.

Indication if the calibration is present/used in the process

Information about the vacuum pumps in the calibration zone. The DrivesType is defined in OPC 40083.

Information about the water pumps in the calibration zone. The DrivesType is defined in OPC 40083.

Measreument of the water temperature in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

Measreument of the water flow in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

Measreument of the water level in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

Measreument of the pressure of the air shower in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

Container for any other measured values in the calibration zone.