Table 85 – PnDeviceStateEnumeration

Name

Description

OFFLINE_0

The device is not online, or no information is available. The device is offline if no ARs other than possible Device Access AR’s exist.

OFFLINE_DOCKING_1

The device is a docking device and currently not online.

ONLINE_2

The device is online. This is the case if at least one AR other than possible Device Access AR’s exists.

ONLINE_DOCKING_3

The device is a docking device and currently online.

Table 86 – PnARStateEnumeration

Name

Description

CONNECTED_0

The AR connection to the device is established

UNCONNECTED_1

The AR connection to the device is not established

UNCONNECTED_ERR_DEVICE_NOT_FOUND_2

The AR connection to the device is not established because the device is not available in the network

UNCONNECTED_ERR_DUPLICATE_IP_3

The AR connection to the device is not established because the IP address of the device exists multiple times

UNCONNECTED_ERR_DUPLICATE_NOS_4

The AR connection to the device is not established because the Name of Station of the device exists multiple times

Table 87 – PnARTypeEnumeration

Name

Description

IOCARSingle_0

-

IOSAR_6

The supervisor AR is a special form of the IOCARSingle allowing takeover of the ownership of a submodule

IOCARSingleUsingRT_CLASS_3_16

This is a special form of the IOCARSingle indicating RT_CLASS_3 communication

IOCARSR_32

The SR AR is a special form of the IOCARSingle indicating system redundancy or dynamic reconfiguration usage

See: [PN Protocol], Table 508 – ARType

Table 88 – PnModuleStateEnumeration

Name

Description

NO_MODULE_0

For example module not plugged

WRONG_MODULE_1

For example ModuleIdentNumber wrong

PROPER_MODULE_2

Module is okay but at least one submodule is locked, wrong or missing

SUBSTITUTE_3

Module is not the same as requested – but the IO device was able to adapt by its own knowledge

OK_4

Default state

See: [PN Protocol], Table 586 – ModuleState

Table 89 – PnSubmoduleAddInfoEnumeration

Name

Description

NO_ADD_INFO_0

-

TAKEOVER_NOT_ALLOWED_1

This Submodule is not available for takeover by IOSAR.

See: [PN Protocol], Table 587 – SubmoduleState.AddInfo

Table 90 – PnSubmoduleARInfoEnumeration

Name

Description

OWN_0

This AR is owner of the submodule

APPLICATION_READY_PENDING_128

This AR is owner of the submodule but it is blocked. For example parameter checking pending

SUPERORDINATED_LOCKED_256

This AR is not owner of the submodule. It is blocked by superordinated means

LOCKED_BY_IO_CONTROLLER_384

This AR is not owner of the submodule. It is owned by another IOAR

LOCKED_BY_IO_SUPERVISOR_512

This AR is not owner of the submodule. It is owned by another IOSAR

See: [PN Protocol], Table 592 – SubmoduleState.ARInfo

Table 91 – PnSubmoduleIdentInfoEnumeration

Name

Description

OK_0

OK

SUBSTITUTE_2048

Substitute (SU)

WRONG_4096

Wrong (WR)

NO_SUBMODULE_6144

NoSubmodule (NO)

See: [PN Protocol], Table 593 – SubmoduleState.IdentInfo

Table 92 – PnChannelTypeEnumeration

Name

Description

UNSPECIFIC_0

Shall be used if the field ChannelNumber contains the value 0x8000 (submodule)Furthermore, it shall be used if none of the below defined types are appropriate.

1BIT_1

The data length of this channel is 1 Bit.

2BIT_2

The data length of this channel is 2 Bit.

4BIT_3

The data length of this channel is 4 Bit.

8BIT_4

The data length of this channel is 8 Bit.

16BIT_5

The data length of this channel is 16 Bit.

32BIT_6

The data length of this channel is 32 Bit.

64BIT_7

The data length of this channel is 64 Bit.

See: [PN Protocol], Table 651 – ChannelProperties.Type

Table 93 – PnChannelAccumulativeEnumeration

Name

Description

SINGLE_0

Single channel

Diagnosis only for the reported channel

ACCUMULATIVE_256

Multiple channel

Accumulative diagnosis from more than one channel

See: [PN Protocol], Table 652 – ChannelProperties.Accumulative

Table 94 – PnChannelMaintenanceEnumeration

Name

Description

FAULT_0

Fault

MAINTENANCE_REQUIRED_512

Maintenance required

MAINTENANCE_DEMANDED_1024

Maintenance demanded

USE_QUALIFIED_CHANNEL_QUALIFIER_1536

Use QualifiedChannelQualifier variable

See: [PN Protocol], Table 653 – ChannelProperties.Maintenance

Table 95 – PnChannelSpecifierEnumeration

Name

Description

ALL_DISAPPEARS_0

The Diagnosis ASE contains no longer any entries (of any severity) for this channel

APPEARS_2048

An event appears and/or exists further

The Diagnosis ASE contains this and possible other entries for this channel.

DISAPPEARS_4096

An event disappears and/or exists no longer

The Diagnosis ASE contains no longer any entries of the same severity for this channel

DISAPPEARS_OTHER_REMAIN_6144

An event disappears

The Diagnosis ASE still contains other entries of the same severity for this channel

See: [PN Protocol], Table 656 – ChannelProperties.Specifier

Table 96 – PnChannelDirectionEnumeration

Name

Description

MANUFACTURER_SPECIFIC_0

Manufacturer specific

INPUT_CHANNEL_8192

Input

OUTPUT_CHANNEL_16384

Output

BIDIRECTIONAL_CHANNEL_24576

Input/Output

See: [PN Protocol], Table 585 – ChannelProperties.Direction

Table 97 – PnAssetTypeEnumeration

Name

Description

DEVICE_0

Device

MODULE_1

Real Module

SUBMODULE_2

Real Submodule

ASSET_3

Asset

Table 98 – PnAssetChangeEnumeration

Name

Description

INSERTED_0

Asset has been added

REMOVED_1

Asset has been removed

CHANGED_2

Asset has been changed

Table 99 – PnLinkStateEnumeration

Name

Description

UP_1

Ready to pass packets

DOWN_2

No packets are passed

TESTING_3

In some test mode

UNKNOWN_4

Status cannot be determined

DORMANT_5

In pending state waiting for some external event

NOT_PRESENT_6

Port not present

LOWER_LAYER_DOWN_7

Down due to lower layer

Table 100 – PnPortStateEnumeration

Name

Description

UNKNOWN_0

Status cannot be determined

DISABLED_DISCARDING_1

The port is administratively disabled and discarding frames

BLOCKING_2

The port blocks incoming frames

LISTENING_3

The port is listening to and sending BPDUs (Bridge Protocol Data Units).

LEARNING_4

The port is listening for and processing BPDUs and starts learning MAC’s

FORWARDING_5

The port is processing BPDUs and forwarding frames

BROKEN_6

The port blocks incoming frames since a configuration error is detected

Table 101 – IMTagSelectorEnumeration

Name

Description

FUNCTION_0

The Tag_Function argument shall be written.

LOCATION_1

The Tag_Location argument shall be written.

BOTH_2

Both arguments, Tag_Function and Tag_Location, shall be written.