The EnergyDevicePowerOffType type provides access to the Sleep Mode WOL functionality of the device if supported.

Table 32 – EnergyDevicePowerOffType Definition

Attribute

Value

BrowseName

EnergyDevicePowerOffType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseObjectType defined in [OPC 10000-5].

0:HasComponent

Variable

RegularTimeToOperate

0:Duration

0:BaseDataVariableType

M, RO

0:HasComponent

Variable

TimeMinPause

0:Duration

0:BaseDataVariableType

M, RO

0:HasComponent

Variable

ModePowerConsumption

0:UInt32

0:BaseDataVariableType

M, RO

0:HasProperty

Variable

WOLMagicPacket

0:ByteString

0:PropertyType

M, RO

0:HasComponent

Method

SwitchOffWOL

M

A RepresentedBy Reference may connect the Object to the representing PROFIenergy service access point Object (see PeServiceAccessPointType). The BrowseName of the Reference shall be “PESAP”. If the PESAP is not part of the Information Model, the RepresentedBy Reference in the EnergyDevicePowerOffType Object is omitted.

The RegularTimeToOperate Variable shall contain the time value to reach the state “Ready to operate” if the Wake-on-LAN sleep mode is terminated by a wake-up (see below).

The ModePowerConsumption Variable shall contain the power consumption in theWake-on-LAN sleep mode. Unit: [kW].

The WOLMagicPacket Variable shall contain the 6 bytes MAC address to be used with the magic packet sent for wake-up (see [PE CAP], chapter 7.3.4.9).

The SwitchOffWOL Method initiates the transition into the Wake-on-LAN sleep mode. In this mode the device is effectively switched off and unavailable for network communication. The device can be awakened using the magic packet (see [PE CAP], chapter 7.3.4.9).

This Method starts the transition into the special Wake-on-LAN mode.

Signature

SwitchOffWOL (

[out] 0:Byte ModeID

[out] 0:Duration CurrentTimeToDestination

[out] 0:Duration RegularTimeToOperate

[out] 0:Duration TimeMinLengthOfStay

[out] 0:Byte ReturnCode

);

Argument

Description

ModeID

ID of the “Sleep Mode WOL” (0xFE) if successful, otherwise 0.

CurrentTimeToDestination

Time needed to reach the Energy Saving Mode if successful, otherwise 0.

RegularTimeToOperate

Time needed to reach “Ready to operate” again if the Wake-on-LAN sleep mode will be regularly terminated if successful, otherwise 0.

TimeMinLengthOfStay

Time of minimum stay in the Wake-on-LAN sleep mode if successful, otherwise 0.

ReturnCode

Return code. See Table 16.

The Method Result Codes (defined in Call Service) are defined in Table 15.