The EquipmentType is used to structure elements for machine tool equipment.

The EquipmentType is formally defined in Table 46.

Table 46 – EquipmentType Definition

Attribute

Value

BrowseName

EquipmentType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node.

0:HasComponent

Object

Tools

ToolListType

O

Tools is the entry point to the list of BaseToolType subtype instances in the machine tool. The list of tools provided here shall contain the tools that are present in the machine tool and the magazines the machine tool has automated access to.

The ToolListType is a list of tools, where a tool may be a single tool or a multitool.

The ToolListType is formally defined in Table 47.

Table 47 – ToolListType Definition

Attribute

Value

BrowseName

ToolListType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node.

0:HasComponent

Object

<Tool>

BaseToolType

OP

0:HasProperty

Variable

NodeVersion

0:String

0:PropertyType

O, RO

0:GeneratesEvent

ObjectType

0:GeneralModelChangeEventType

<Tool > is an OptionalPlaceholder for nodes of BaseToolType. The tool list can thus contain any number of tools, including none. For the DisplayName of the <Tool >, it is recommended to use the value of the Name Property of the respective BaseToolType instance.

The contents of the ToolListType instance can change during the Server runtime (e.g. if tools are inserted into the machine tool or removed from it). A change in the list can be indicated using the NodeVersion Property and the GeneralModelChangeEventType. The NodeVersion and the GeneralModelChangeEventType are intended to be used in the way defined in OPC 10000-3 and 7.3.

The BaseToolType serves as a supertype to the ToolType and the MultiToolType. It is an abstract type, meaning it is not instantiated, only the subtypes are.

The BaseToolType is formally defined in Table 48.

Table 48 – BaseToolType Definition

Attribute

Value

BrowseName

BaseToolType

IsAbstract

True

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node.

0:HasSubtype

ObjectType

MultiToolType

Defined in 8.5.5

0:HasSubtype

ObjectType

ToolType

Defined in 8.5.4

0:HasProperty

Variable

Identifier

0:String

0:PropertyType

O, RO

0:HasComponent

Object

Location

0:BaseObjectType

O

0:HasProperty

Variable

Name

0:String

0:PropertyType

O, RO

Table 49 – BaseToolType Additional Subcomponents

Source Path

References

NodeClass

BrowseName

DataType

TypeDefinition

Others

Location

0:HasProperty

Variable

Name

0:String

0:PropertyType

M, RO

Location

0:HasProperty

Variable

PlaceNumber

0:UInt16

0:PropertyType

M, RO

Identifier is a unique identifier for a tool. The Identifier can be used to provide a unique ID given by a superordinated management system. This ID can’t be generated on the machine, it has to be transferred to the machine by a global tool management system.

The Location indicates where the tool is located, represented by Name, a name for the tool’s location (e.g. the tool magazine) and PlaceNumber, the place number at this location (refer to Table 49). If there is a shared magazine for multiple machines, a tool will be shown in the tool list (see 8.5.1 and 8.5.2) of all machines for which the tool is available.

The Name is used to name a tool to ease recognition. This name can be specific to the tool (e.g. “special_formpress_part294”), to the type of tool (e.g. “8mm drill”) or to the program (e.g. “T3”).

The ToolType is the representation of a tool. Tools are exchangeable components used in a machine tool to execute the production process and may for example be drills, ball milling heads, cutting inserts, pinching tools and so forth. It may also be a non-contact tool, for example a processing laser.

The ToolType is formally defined in Table 50.

Table 50 – ToolType Definition

Attribute

Value

BrowseName

ToolType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseToolType defined in 8.5.3 i.e. inheriting the InstanceDeclarations of that Node.

0:HasComponent

Variable

ControlIdentifier1

0:UInt32

0:BaseDataVariableType

M, RO

0:HasComponent

Variable

ControlIdentifier2

0:UInt32

0:BaseDataVariableType

O, RO

0:HasComponent

Variable

ControlIdentifierInterpretation

ToolManagement

0:BaseDataVariableType

M, RO

0:HasComponent

Variable

LastUsage

0:UtcTime

0:BaseDataVariableType

O, RO

0:HasComponent

Variable

Locked

0:Boolean

0:BaseDataVariableType

M, RO

0:HasComponent

Variable

PlannedForOperating

0:Boolean

0:BaseDataVariableType

O, RO

0:HasComponent

Object

ToolLife

0:BaseObjectType

O

The components of the ToolType have additional references which are defined in Table 51.

Table 51 – ToolType Additional Subcomponents

Source Path

References

NodeClass

BrowseName

DataType

TypeDefinition

Others

Locked

0:HasProperty

Variable

ReasonForLocking

ToolLocked

0:PropertyType

M, RO

ToolLife

0:HasComponent

Variable

<ToolLifeEntry>

0:Number

ToolLifeType

MP, RO

The two components ControlIdentifier1, ControlIdentifier2 are to be interpreted depending on ControlIdentifierInterpretation (refer to 12.10). This reflects the main methods which CNC-based tool management approaches use. In a ToolNumberBased approach, only ControlIdentifier1 is provided and sufficient to identify the tool. In a system with a ToolGroupBasedManagemet, tools are identified by a group and an indexing number inside this group, which are provided as ControlIdentifier1 and ControlIdentifier2 respectively. Should yet another approach be present in a given system, this is indicated by the ControlIdentifierInterpretation being reported as custom. It shall be noted that this identification data is used to identify the tool in the reference frame of the tool management system inside the machine. In many applications the machine control system uses these identifiers to handle multiple tools which are equivalent and present in the machine as spares. For an identification of the tool inside the NC program or globally, independent of the machine management view, the properties Name and Identifier are provided by the BaseToolType.

LastUsage is the time, were the specific tool was the active tool on a tool carrier for the last time, while the machine was operating in an automatic mode (e.g. for CNC controllers: in Mdi- or Automatic-mode).

The property Locked represents whether the tool was locked from use in processing. If True, the tool was locked. It has an additional property as seen in Table 51, ReasonForLocking. ReasonForLocking is defined in 12.8.

The component PlannedForOperating marks tools which the machine tool control can already mark as being needed for the running NC program or process when being True.

The ToolLife reports on how the tool use and tool life is being currently managed and how far the use of the tool has progressed. If more than one measurement is provided as <ToolLifeEntry >, they shall show the same value as if only one entry was provided, so they shall not be accumulated by a Client.

image020.png

Figure 15 – Instance Example of a MultiToolType Object

The MultiToolType represents a unit of different tools, usually used in order to have several tools available in-process without requiring explicit tool-changes. Multitools carry several tools on one tool magazine socket or one revolver index position and will be mounted into the machine tool as one prepared unit.

Typical applications are in turning, when one indexed position of the tool revolver holds several outer-diameter cutting inserts and boring tools, such that a tool change process can quickly complete by merely readjusting the CNC setpoint position tool compensation.

An instance example on how to instantiate the MultiToolType is shown in Figure 15.

The MultiToolType is formally defined in Table 52.

Table 52 – MultiToolType Definition

Attribute

Value

BrowseName

MultiToolType

IsAbstract

False

References

Node Class

BrowseName

DataType

TypeDefinition

Other

Subtype of the BaseToolType defined in 8.5.3 i.e. inheriting the InstanceDeclarations of that Node.

0:HasComponent

Object

<Tool>

ToolType

OP

<Tool > is a placeholder for instances of ToolType. Using this placeholder, the individual ToolType instances making up the MultiTool can be represented in the information model. For individual tools within the MultiTool, use of the Location object is not recommended.