This enumeration contains possible operation modes for the machine tool. The values of the MachineOperationMode enum are derived from the MO modes of machinery functional safety standards. The values of the MachineOperationMode only represent the machine tool status and shall not be used in a safety relevant manner.
The enumeration is defined in Table 92.
Table 92 – MachineOperationMode EnumValues Fields
|Manual||0||The machine tool is controlled manually, by the operator. Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited.|
|Automatic||1||Operating mode for the automatic, programmed and continuous operation of the machine. Manual loading and unloading workpieces are possible when the automatic program is stopped. Axis movement speeds are fully available to the machine tool’s ability.|
|Setup||2||Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited. In this mode, the operator can make settings for the subsequent work processes.|
|AutoWithManualIntervention||3||Operating mode with the possibility of manual interventions in the machining process as well as limited automatic operation started by the operator. Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited.|
|Service||4||Operating mode for service purposes. This mode shall not be used for manufacturing any parts. This mode shall only be used by authorized personnel.|
|Other||5||The machine operation mode is different from the values defined in this enumeration.|
Its representation in the AddressSpace is defined in Table 93.
Table 93 – MachineOperationMode Definition
Subtype of the Enumeration type defined in OPC 10000-3