7 OPC UA ObjectTypes ToC Previous Next

7.3 Material ToC Previous Next

7.3.5 GlassTypeDefinition ToC Previous Next

The GlassType provides information about flat glass sheets and is formally defined in Table 49.

Table 49 – GlassType Definition

Attribute Value        
BrowseName GlassType        
IsAbstract false        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of the BaseMaterialType defined in this Companion Specification, i.e. inheriting the InstanceDeclarations of that Node.          
0:HasComponent Variable Absorption 0:Number 0:AnalogUnitType Optional
0:HasProperty Variable CoatingClass CoatingClassEnumeration 0:PropertyType Mandatory
0:HasComponent Variable CoatingEmessivity 0:Number 0:AnalogUnitType Optional
0:HasProperty Variable CoatingSubClass LimitedString64 0:PropertyType Optional
0:HasComponent Variable ElectricalConductivity 0:Number 0:AnalogUnitType Optional
0:HasProperty Variable Orientation 0:Number 0:PropertyType Mandatory
0:HasComponent Variable Reflection 0:Number 0:AnalogUnitType Optional
0:HasProperty Variable SignificantSide SignificantSideEnumeration 0:PropertyType Mandatory
0:HasProperty Variable StructureClass LimitedString64 0:PropertyType Mandatory
0:HasProperty Variable StructureAlignment StructureAlignmentEnumeration 0:PropertyType Mandatory
0:HasComponent Variable Transmission 0:Number 0:AnalogUnitType Optional
The following nodes are override from BaseMaterialType and the Modelling Rules change to Mandatory          
0:HasComponent Variable X 0:Double 0:AnalogUnitType Mandatory
0:HasComponent Variable Y 0:Double 0:AnalogUnitType Mandatory

Absorption describes the absorption of the raw material.

CoatingClass defines which coatings have been applied to the SignificantSide.

CoatingEmessivity describes the emissivity of the coating.

CoatingSubClass provides a vendor-specific unique identification of the coating material.

ElectricalConductivity describes the conductivity of the raw material in Siemens.

Orientation describes the angle of the material coordinates in reference to the MachineProcessingCoordinateSystem.

Reflection describes the reflection of the raw material.

StructureClass defines a vendor-specific description of the glass structure (surface topology). An example for that is Chinchilla white.

SignificantSide specifies whether the significant (coating) side (see definition in Terms) should be at the top or bottom during machining (see also section 3.2.6 and 0).

StructureAlignment specifies how the surface structure is aligned. See StructureAlignmentEnumeration for more information e.g. about the orientation.

Transmission describes the transmission of the raw material.

Previous Next