8 Alarm Metrics ToC Previous Next

8.4 Reset Method ToC Previous Next

The Reset Method is used reset all of the counters, rates and time in the Object

Signature

Reset();

Method Result Codes in Table 51 (defined in Call Service)

Table 142 – Suppress result codes

Result Code Description
Bad_MethodInvalid The MethodId provided does not correspond to the ObjectId provided. See 10000-4 for the general description of this result code.
Bad_NodeIdInvalid Used to indicate that the specified ObjectId is not valid. See 10000-4 for the general description of this result code.

Comments

The Reset Method will clear all setting in the diagnostic object and initialize them to zero.

Table 143 specifies the AddressSpace representation for the Reset Method.

Table 143 – Reset Method AddressSpace Definition

Attribute Value
BrowseName Reset
References NodeClass BrowseName DataType TypeDefinition ModellingRule
           
AlwaysGeneratesEvent ObjectType AuditUpdateMethodEventType Defined in 10000-5    
ConformanceUnits          
A & C Alarm Metrics          

If Auditing is supported, this Method shall generate an Event of AuditConditionMethodEventType for all invocations of the Method.

Previous Next