5 Model ToC Previous Next

5.2 OPC UA Interfaces ToC Previous Next

5.2.9 IIeeeBaseTsnStatusStreamType Interface ToC Previous Next index

This OPC UA Interface is used to represent the status of a TSN stream. The IIeeeBaseTsnStatusStreamType is formally defined in Table 11.

Table 11 – IIeeeBaseTsnStatusStreamType definition

Attribute Value
BrowseName IIeeeBaseTsnStatusStreamType
IsAbstract True

Subtype of the BaseInterfaceType defined in OPC 10000-5

References NodeClass BrowseName DataType TypeDefinition ModellingRule
HasComponent Variable TalkerStatus TsnTalkerStatus BaseDataVariableType Optional
HasComponent Variable ListenerStatus TsnListenerStatus BaseDataVariableType Optional
HasComponent Variable FailureCode TsnFailureCode BaseDataVariableType Mandatory
HasComponent Variable FailureSystemIdentifier Byte[][8] BaseDataVariableType Mandatory
Conformance Units          
BNM TSN Base Info          

TalkerStatus of DataType TsnTalkerStatus contains the Reservation Failure Code as defined in the “FailureInformation” in IEEE 802.1Qcc-2018 clause 46.2.5.1.1.

ListenerStatus of DataType TsnListenerStatus contains the Reservation Failure Code as defined in the “FailureInformation” in IEEE 802.1Qcc-2018 clause 46.2.5.1.2.

FailureCode of DataType TsnFailureCode contains the Reservation Failure Code as defined in the “FailureInformation” in IEEE 802.1Qcc-2018 clause 46.2.5.1.3.

FailureSystemIdentifier is an Array of Arrays of 8 Bytes and contains the System Identifiers representing the network nodes where the failure occurred. See “System Identifier” in “FailureInformation” in IEEE 802.1Q-2018 clause 35.2.2.8.7.

Previous Next