5 Model ToC Previous Next

5.5 Condition Model ToC Previous Next

5.5.4 Disable Method ToC Previous Next

The Disable Method is used to change a Condition instance to the Disabled state. Normally, the NodeId of the object instance as the ObjectId is passed to the Call Service. However, some Servers do not expose Condition instances in the AddressSpace. Therefore, all Servers shall allow Clients to call the Disable Method by specifying ConditionId as the ObjectId. The Method cannot be called with an ObjectId of the ConditionType Node.



Method Result Codes in Table 11 (defined in Call Service)

Table 11 – Disable result codes

Result Code Description
Bad_ConditionAlreadyDisabled See Table 103 for the description of this result code.

Table 12 specifies the AddressSpace representation for the Disable Method.

Table 12 – Disable Method AddressSpace definition

Attribute Value
BrowseName Disable
References NodeClass BrowseName DataType TypeDefinition ModellingRule
AlwaysGeneratesEvent ObjectType AuditConditionEnableEventType Defined in 5.10.2    

Previous Next