To promote interoperability of clients and Servers, the OPC UA AddressSpace is structured as a hierarchy, with the top levels standardised for all Servers. Figure 1 illustrates the structure of the AddressSpace. All Objects in this figure are organised using Organizes References and have the ObjectType FolderType as type definition.

Figure 1 – Standard AddressSpace structure

The remainder of this provides descriptions of these standard Nodes and the organization of Nodes beneath them. Servers typically implement a subset of these standard Nodes, depending on their capabilities.

This standard Object is the browse entry point for the AddressSpace. It contains a set of Organizes References that point to the other standard Objects. The "Root" Object shall not reference any other NodeClasses. It is formally defined in Table 96.

Table 96 – Root definition

Attribute		Value
BrowseName		Root
References	NodeClass		BrowseName	Comment
HasTypeDefinition	ObjectType		FolderType	Defined in 6.6
Organizes	Object		Views	Defined in 8.2.3
Organizes	Object		Objects	Defined in 8.2.4
Organizes	Object		Types	Defined in 8.2.5
Conformance Units
Base Info Core Structure 2

This standard Object is the browse entry point for Views. Only Organizes References are used to relate View Nodes to the "Views" standard Object. All View Nodes in the AddressSpace shall be referenced by this Node, either directly or indirectly. That is, the "Views" Object may reference other Objects using Organizes References. Those Objects may reference additional Views. Figure 2 illustrates the Views organization. The "Views" standard Object directly references the Views "View1" and "View2" and indirectly "View3" by referencing another Object called "Engineering".

Figure 2 – Views organization

The "Views" Object shall not reference any other NodeClasses. The "Views" Object is formally defined in Table 97.

Table 97 – Views definition

Attribute	Value
BrowseName	Views
References	NodeClass	BrowseName	Comment
HasTypeDefinition	ObjectType	FolderType	Defined in 6.6
Conformance Units
Base Info Core Views Folder

This standard Object is the browse entry point for Object Nodes. Figure 3 illustrates the structure beneath this Node. Only Organizes References are used to relate Objects to the "Objects" standard Object. A View Node can be used as entry point into a subset of the AddressSpace containing Objects and Variables and thus the "Objects" Object can also reference View Nodes using Organizes References. The intent of the "Objects" Object is that all Objects and Variables that are not used for type definitions or other organizational purposes (e.g. organizing the Views) are accessible through hierarchical References starting from this Node. However, this is not a requirement, because not all Servers may be able to support this. This Object references the standard Server Object defined in 8.3.2.

Figure 3 – Objects organization

The "Objects" Object is formally defined in Table 98.

Table 98 – Objects definition

Attribute		Value
BrowseName		Objects
References	NodeClass		BrowseName	Comment
HasTypeDefinition	ObjectType		FolderType	Defined in 6.6
Organizes	Object		Server	Defined in 8.3.2
Organizes	Object		Locations	Defined in 8.2.12.
Conformance Units
Base Info Core Structure 2

This standard Object Node is the browse entry point for type Nodes. Figure 1 illustrates the structure beneath this Node. Only Organizes References are used to relate Objects to the "Types" standard Object. The "Types" Object shall not reference any other NodeClasses. It is formally defined in Table 99.

Table 99 – Types definition

Attribute	Value
BrowseName	Types
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		Object	ObjectTypes	Defined in 8.2.6
Organizes		Object	VariableTypes	Defined in 8.2.7
Organizes		Object	ReferenceTypes	Defined in 8.2.8
Organizes		Object	DataTypes	Defined in 8.2.9
Organizes		Object	EventTypes	Defined in 8.2.10
Organizes		Object	InterfaceTypes	Defined in 8.2.11
Conformance Units
Base Info Core Types Folders

This standard Object Node is the browse entry point for ObjectType Nodes. Figure 4 illustrates the structure beneath this Node showing some of the standard ObjectTypes defined in Clause 6. Only Organizes References are used to relate Objects and ObjectTypes to the "ObjectTypes" standard Object. The "ObjectTypes" Object shall not reference any other NodeClasses.

Figure 4 – ObjectTypes organization

The intention of the "ObjectTypes" Object is that all ObjectTypes of the Server are either directly or indirectly accessible browsing HierarchicalReferences starting from this Node. However, this is not required and Servers might not provide some of their ObjectTypes because they may be well-known in the industry, such as the ServerType defined in 6.3.1.

This Object also indirectly references the BaseEventType defined in 6.4.2, which is the base type of all EventTypes. Thereby it is the entry point for all EventTypes provided by the Server. It is required that the Server expose all its EventTypes, so a client can usefully subscribe to Events.

The "ObjectTypes" Object is formally defined in Table 100.

Table 100 – ObjectTypes definition

Attribute	Value
BrowseName	ObjectTypes
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		ObjectType	BaseObjectType	Defined in 6.2
Conformance Units
Base Info Core Types Folders

This standard Object is the browse entry point for VariableType Nodes. Figure 5 illustrates the structure beneath this Node. Only Organizes References are used to relate Objects and VariableTypes to the "VariableTypes" standard Object. The "VariableTypes" Object shall not reference any other NodeClasses.

Figure 5 – VariableTypes organization

The intent of the "VariableTypes" Object is that all VariableTypes of the Server are either directly or indirectly accessible browsing HierarchicalReferences starting from this Node. However, this is not required and Servers might not provide some of their VariableTypes, because they may be well-known in the industry, such as the "BaseVariableType" defined in 7.2.

The "VariableTypes" Object is formally defined in Table 101.

Table 101 – VariableTypes definition

Attribute	Value
BrowseName	VariableTypes
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		VariableType	BaseVariableType	Defined in 7.2
Conformance Units
Base Info Core Types Folders

This standard Object is the browse entry point for ReferenceType Nodes. Figure 6 illustrates the organization of ReferenceTypes. Organizes References are used to define ReferenceTypes and Objects referenced by the "ReferenceTypes" Object. The "ReferenceTypes" Object shall not reference any other NodeClasses. See Clause 11 for a discussion of the standard ReferenceTypes that appear beneath the "ReferenceTypes" Object.

Figure 6 – ReferenceType definitions

Since ReferenceTypes will be used as filters in the browse Service and in queries, the Server shall provide all its ReferenceTypes, directly or indirectly following hierarchical References starting from the "ReferenceTypes" Object. This means that, whenever the client follows a Reference, the Server shall expose the type of this Reference in the ReferenceType hierarchy. It shall provide all ReferenceTypes so that the client would be able, following the inverse subtype of References, to come to the base References ReferenceType. It does not mean that the Server shall expose the ReferenceTypes that the client has not used any Reference of.

The "ReferenceTypes" Object is formally defined in Table 102.

Table 102 – ReferenceTypes definition

Attribute	Value
BrowseName	ReferenceTypes
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		ReferenceType	References	Defined in 11.1
Conformance Units
Base Info Core Types Folders

This standard Object is the browse entry point for DataTypes that the Server wishes to expose in the AddressSpace.

DataType Nodes should be made available using Organizes References pointing either directly from the "DataTypes" Object to the DataType Nodes or using additional Folder Objects for grouping purposes. The intent is that all DataTypes of the Server exposed in the AddressSpace are accessible following hierarchical References starting from the "DataTypes" Object. However, this is not required.

The "DataTypes" Object is formally defined in Table 103.

Table 103 – DataTypes definition

Attribute		Value
BrowseName		DataTypes
References	NodeClass		BrowseName	Comment
HasTypeDefinition	ObjectType		FolderType	Defined in 6.6
Organizes	DataType		BaseDataType	Defined in 12.2
Conformance Units
Base Info Core Types Folders

This standard Object Node is the browse entry point for EventType Nodes. Figure 7 illustrates the structure beneath this Node showing some of the standard EventTypes defined in Clause 6. Only Organizes References are used to relate Objects and ObjectTypes to the "EventTypes" standard Object. The "EventTypes" Object shall not reference any other NodeClasses.

Figure 7 – EventTypes organization

The intention of the "EventTypes" Object is that all EventTypes of the Server are either directly or indirectly accessible browsing HierarchicalReferences starting from this Node. It is required that the Server expose all its EventTypes, so a client can usefully subscribe to Events.

The "EventTypes" Object is formally defined in Table 104.

Table 104 – EventTypes definition

Attribute	Value
BrowseName	EventTypes
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		ObjectType	BaseEventType	Defined in 6.4.2
Conformance Units
Address Space Events 2

This standard Object Node is the browse entry point for ObjectType Nodes that represent Interfaces. Figure 8 illustrates the structure beneath this Node showing some of the standard ObjectTypes defined in clause 6. Only Organizes References are used to relate Objects and Interfaces to the “InterfaceTypes” standard Object. The “InterfaceTypes” Object shall not reference any other NodeClasses.

Figure 8 – InterfaceTypes Organization

The intention of the “InterfaceTypes” Object is that all Interfaces of the Server are either directly or indirectly accessible browsing HierarchicalReferences starting from this Node. However, this is not required and Servers might not provide some of their Interfaces because they may be well-known in the industry.

The “InterfaceTypes” Object is formally defined in Table 105.

Table 105 – InterfaceTypes definition

Attribute	Value
BrowseName	InterfaceTypes
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Organizes		ObjectType	BaseInterfaceType	Defined in 6.9
Conformance Units
Address Space Interfaces

This standard Object is the browse entry point for Object Nodes which represent different types of locations. Figure 9 illustrates the structure beneath this Node. Only Organizes References are used to relate Objects.

Figure 9 – Locations organization

The intent of the "Locations" Object is an entry point for different types of locations. The types of locations organize locations.

The "Locations" Object is formally defined in Table 101.

Table 106 – Locations definition

Attribute	Value
BrowseName	Locations
References		NodeClass	BrowseName	Comment
HasTypeDefinition		ObjectType	FolderType	Defined in 6.6
Conformance Units
Base Info Locations Object