The OPC UA Secure Conversation (UASC) mechanism described 6.7 is designed for use with asymmetric cryptography algorithms, such as RSA, that allow Public Keys to be used for encryption and for digital signatures. ECC is an asymmetric cryptography algorithm that only supports digital signatures. To accommodate algorithms like ECC, the UASC handshake needs to be modified to allow negotiation of inputs used for key derivation in 6.7.5 without making the keys available to eavesdroppers. This negotiation uses a Diffie Hellman algorithm defined in and is shown in Figure 11b.
Figure 11b – ECC Key Negotiation
ApplicationInstance Certificates for ECC have a public-private key pair that are used to create and verify a digital signature. To negotiate the keys needed for the SecureChannel the Client generates a new key pair (JC, KC) and passes the Public Key (JC) in the request. After verifying the signature on the request, the Server generates a new key pair (JS, KS) and returns the Public Key (JS) in the response. The new key pairs are used each time a SecureChannel is negotiated and they are called EphemeralKeys.
ECC public-private key pairs are always based on a specific elliptic curve function which is used for the ECC calculations. Many curves exist, however, ECC cryptography libraries support a finite set of “named curves” to allow for better interoperability. Each OPC UA SecurityPolicy defined in OPC 10000-7 specifies exactly one named curve which is used for the EphemeralKeys.
Each ECC ApplicationInstance Certificate is also based on a named curve. Each SecurityPolicy specifies a list of named curves which are permitted for use in the ApplicationInstance Certificate. This list always includes the named curved used for the EphemeralKey, however, it may allow other named curves. OPC UA applications that support ECC SecurityPolicies will need to support multiple ApplicationInstance Certificates.
ECC Public Keys and digital signatures are the output of an ECC operation. The encoding of these outputs depends on the ECC curve and are described by the SecurityPolicy in OPC 10000-7.
Clause 6.7.4 specifies the contents of the OpenSecureChannel request and response messages. When using an ECC SecurityPolicy the ClientNonce is the Public Key for the Client’s EphemeralKey encoded using the Public Key encoding for the curve. Similarly, the ServerNonce is the Public Key for the Server’s EphemeralKey.
The EphemeralKeys are used to calculate a shared secret by using the Private Key of an EphemeralKey and the Public Key of the peer’s EphemeralKey. The exact algorithm to calculate the shared secret depends on the ECC curve and is defined by the SecurityPolicy. This shared secret is then used to derive key data using the following algorithm from RFC 5869. Note that the algorithm is repeated here for clarity, however, the RFC is the normative source.
Step 1: Calculate Salts
ServerSalt = L | UTF8(opcua-server) | ServerNonce | ClientNonce ClientSalt = L | UTF8(opcua-client) | ClientNonce | ServerNonce
- L is the length of derived key material needed encoded as a 16-bit little endian integer;
- UTF8(label) is the UTF8 encoding of the string literal ‘label’;
- ServerNonce is the Server EphemeralKey from the OpenSecureChannel response;
- ClientNonce is the Client EphemeralKey from the OpenSecureChannel request;
concatenates sequences of bytes;
- Salt is a sequence of bytes.
Step 2: Extract
PRK = HMAC-Hash(Salt, IKM)
- HMAC uses a Hash function specified by the KeyDerivationAlgorithm;
- IKM is the x-coordinate of the shared secret;
- Salt is calculated in Step 1;
- PRK is a pseudorandom output with length equal to the Hash size.
Step 3: Expand
N = ceil(L/HashLen) T = T(1) | T(2) | T(3) | ... | T(N) OKM = first L octets of T where: T(0) = empty string (zero length) T(1) = HMAC-Hash(PRK, T(0) | Info | 0x01) T(2) = HMAC-Hash(PRK, T(1) | Info | 0x02) T(3) = HMAC-Hash(PRK, T(2) | Info | 0x03) ...
- HMAC uses a Hash function specified by the KeyDerivationAlgorithm;
- PRK is the output from Step 1;
- Info is a sequence of bytes;
- L is the length of keying material needed;
- 0x01 is the number 1 encoded as a byte.
- OKM is the output with length equal to L bytes.
The client keys are extracted from the keying material created with IKM=shared secret, Salt=ClientSalt and Info=ClientSalt as shown in Table 49a.
Table 49a – Deriving Client Keys from Keying Material
|ClientInitializationVector||DerivedSignatureKeyLength + EncryptionKeyLength||IntializationVectorLength|
The server keys are extracted from the keying material created with IKM=shared secret, Salt= ServerSalt and Info=ServerSalt as shown in Table 49b.
Table 49b – Deriving Server Keys from Keying Material
|ServerInitializationVector||DerivedSignatureKeyLength + EncryptionKeyLength||IntializationVectorLength|
The SymmetricEncryptionAlgorithm for the SecurityPolicy sets the EncryptionKeyLength and EncryptionBlockSize.
When using Authenticated Encryption, the SigningKey and EncryptingKey are always calculated, however, only one will be used. If the mode is SignAndEncrypt then the EncryptingKey is used. If the mode is SignOnly then the SigningKey is used.
In addition, a unique InitializationVector is needed for each Message. This value contructed from the ClientInitializationVector or ServerInitializationVector where the first 8 bytes are replaced by the values in Table 49c.
Table 49c – Creating a Mask for the Initialization Vector
|TokenId||4||The TokenId specified in the SecurityHeader of MessageChunk being processed.It is encoded as a UInt32 as described in 184.108.40.206.|
|LastSequenceNumber||4||The SequenceNumber specified in the SequenceHeader of last MessageChunk sent in the same direction on the SecureChannel. This number is 0 for the first message.It is encoded as a UInt32 as described in 220.127.116.11.|
The ClientInitializationVector is used when the Client encrypts or signs and the ServerInitializationVector is used when the Server encrypts or signs.
The LastSequenceNumber is the SequenceNumber from the previously sent Message which normally requires the previous Message to be decrypted. If the receiver processes incoming Messages in parallel it can calculate the expected SequenceNumber based on the order in which the encrypted Messages are received.
When using SignOnly mode it is necessary to have a SigningKey that is unique and unpredictable for each message. The transformation defined for the InitializationVector is applied to the ClientSigningKey (when the Client signs) or the ServerSigningKey (when the Server signs). After applying the transformation, a hash is computed using the Hash function specified by the KeyDerivationAlgorithm. If the hash length is greater than or equal to the SigningKey length then the first SigningKey length bytes from the hash are used. If the hash length is less than the SigningKey length then the first hash length bytes of the SigningKey are replaced with the hash.
Once the keys are derived ECC SecureChannels behave the same as RSA SecureChannels.