Various cooking processes are possible with a cooking kettle; these include:

—Gently bring to boil;

—Cooking with various power and simmering stages;

—Keeping warm.

In addition, an agitator can be used.

CookingKettleParameterType provides information about the state of the device, the set values and the current actual values.

The CookingKettleParameterType is formally defined in Table 33.

Table 33 — CookingKettleParameterType definition

Attribute	Value
BrowseName	CookingKettleParameterType
IsAbstract	False
References		NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule AccessLevel
Subtype of KitchenDeviceParameterType
HasComponent		Variable	ProgramMode	CookingKettleModeEnumeration	BaseDataVariableType	M, R
HasComponent		Variable	CookingLevel	Int32	BaseDataVariableType	M, R
HasComponent		Variable	SetTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	SetProcessTime	Int32	AnalogItemType	M, R
HasComponent		Variable	TimeRemaining	Int32	AnalogItemType	M, R
HasComponent		Variable	SetCoreTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualCoreTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	SignalMode	SignalModeEnumeration	BaseDataVariableType	M, R

This variable describes the state of the device, e.g. heating up, frying.

The data type for the CookingKettleModeEnumeration is defined in section 11.4.1.

This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the set process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the remaining process time for cooking in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the set core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the state of the signal output. In addition to the on and off states, the "Signal was acknowledged" state is also saved.

The data type for the SignalModeEnumeration is defined in 11.4.2.