When an asset is operating, several numbers might be of interest when managing the asset, like the hours of operation, hours in standby, etc. Those are often the base to calculate KPIs (key performance indicators) like the OEE (overall equipment efficiency). As this specification is just a base specification for asset management, and the counters are domain specific, this specification does not define any of those counters. It just defines a standardized way to find those counters. Other companion specifications or vendors might define those counters.
In order to provide access to the counters, the concept of a FunctionalGroupas defined in OPC 10000-100is used. This specification just defines to use the standardized name “2:OperationCounters”. Servers might provide the counters using different access paths, but they should provide the 2:OperationCounters FunctionalGroupas well. This FunctionalGroupmight be organized into other FunctionalGroups, so Clientsshall expect that they need to browse several hops to get to all counters. In Figure 5, an example is given.