This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Woodworking.
Table 39 – Conformance Units for Woodworking
|
Category |
Title |
Description |
|
Server |
Woodworking WwMachineType Mandatory Nodes |
All nodes declared as mandatory in the WwMachineType are available in the AddressSpace. The nodes declared as optional may be included in the AddressSpace. Identification must not be writeable. |
|
Server |
Woodworking Machine Identification Writeable |
If the writeable properties of the” WwMachineType Additional Subcomponents” are provided they must be writeable. If they are written the new value must be provided by the server. The new value must still be provided by the server after the restart. |
|
Server |
Woodworking Machine Monitoring |
All nodes declared in the IWwUnitFlagsType and in IWwUnitValuesType may be included in the AddressSpace for the machines. |
|
Server |
Woodworking Machine Events |
The Events node implementing the ObjectType WwEventsDispatcherType exists in the Address Space. |
|
Server |
Woodworking Custom Extensions Functionality |
The folder node ManufacturerSpecific must exist below the <Machine> node (See Figure 6 – Overview of the OPC UA Woodworking information model) |
|
Server |
Woodworking SubUnits Monitoring |
If sub units exist, the “SubUnits” node must be listed below the “State” node of a machine. For each unit an entry of the type “IWwBaseStateType” must exist. All nodes declared as mandatory in the IWwBaseStateType are available in the AddressSpace for each unit of the machine. The nodes declared as optional for this type may be included in the AddressSpace. |
|
Server |
Woodworking Unit State |
In the machine or sub unit the CurrentState of IWwUnitOverviewType and the Flags of IWwUnitFlagsType must exist. The CurrentState must be the result of the Flags as described in 7.7 WwUnitStateEnumeration. |
|
Server |
Woodworking Event Propagation |
When Events are generated by a node, all nodes connected with inverse hierarchical References that have SubscribeToEvents set in the EventNotifier Attribute, shall also generate the Event. This propagates events over all inverse hierarchical References up to the instance of WwMachineType. Each instance of WwMachineType shall have SubscribeToEvents set in the EventNotifier Attribute and thus propagate all Events generated by nodes aggregated by this instance. |
|
Server |
Woodworking Event Messages |
The Events node shall have SubscribeToEvents set in the EventNotifier Attribute. |
Table 40 lists all Profiles defined in this document and defines their URIs.
Table 40 – Profile URIs for Woodworking
|
Profile |
URI |
|
Woodworking Basic Server Profile |
|
|
Woodworking Monitoring Server Facet |
|
|
Woodworking Machine Events Server Facet |
http://opcfoundation.org/UA/Woodworking/Server/MachineEvents |
|
Woodworking Custom Extensions Server Facet |
http://opcfoundation.org/UA/Woodworking/Server/CustomExtensions |
Figure 13 – Profiles and Facets
The following sections specify the Facets available for Servers that implement the Woodworking companion specification. Each section defines and describes a Facet or Profile.
Table 41 defines a Profile that describes the minimum required content and address space functionality any Woodworking server shall at least provide.
Table 41 – Woodworking Basic Server Profile
|
Group |
Conformance Unit / Profile Title |
Mandatory / Optional |
|
Profile |
0: Micro Embedded Device 2017 Server Profile http://opcfoundation.org/UA-Profile/Server/MicroEmbeddedDevice2017 |
M |
|
Profile |
0:SecurityPolicy [B] – Basic256Sha256 Profile |
M |
|
Woodworking |
Woodworking WwMachineType Mandatory Nodes |
M |
|
Woodworking |
Woodworking Machine Identification Writeable |
O |
|
Machinery |
3:Machinery Machine Identification Server Facet |
M |
|
Machinery |
3:Machinery Building Block Organization |
O |
|
Machinery |
3:Machinery State Server Facet |
O |
Table 42 defines a Facet that provides a definition for monitoring the machine.
Table 42 – Woodworking Monitoring Server Facet
|
Group |
Conformance Unit / Profile Title |
M / O |
|
Woodworking |
Woodworking Machine Monitoring |
M |
|
Woodworking |
Woodworking SubUnits Monitoring |
O |
|
Woodworking |
Woodworking Unit State |
M |
Table 43 defines a Facet that provides a definition for providing messages to clients.
Table 43 – Woodworking Machine Events Server Facet
|
Group |
Conformance Unit / Profile Title |
M / O |
|
Woodworking |
Woodworking Machine Events |
M |
|
Woodworking |
Woodworking Event Propagation |
M |
|
Woodworking |
Woodworking Event Messages |
M |
|
Profile |
0:Standard Event Subscription Server Facet http://opcfoundation.org/UA-Profile/Server/StandardEventSubscription |
M |
|
Profile |
0:Address Space Notifier Server Facet http://opcfoundation.org/UA-Profile/Server/AddressSpaceNotifier |
M |
Table 44 defines a Facet that provides customer specific functionality.
Table 44 – Woodworking Custom Extension Server Facet
|
Group |
Conformance Unit / Profile Title |
M / O |
|
Woodworking |
Woodworking Custom Extensions Functionality |
M |