The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
OPC 10000-1, OPC Unified Architecture - Part 1: Overview and Concepts
http://www.opcfoundation.org/UA/Part1/
OPC 10000-2, OPC Unified Architecture - Part 2: Security Model
http://www.opcfoundation.org/UA/Part2/
OPC 10000-3, OPC Unified Architecture - Part 3: Address Space Model
http://www.opcfoundation.org/UA/Part3/
OPC 10000-4, OPC Unified Architecture - Part 4: Services
http://www.opcfoundation.org/UA/Part4/
OPC 10000-5, OPC Unified Architecture - Part 5: Information Model
http://www.opcfoundation.org/UA/Part5/
OPC 10000-6, OPC Unified Architecture - Part 6: Mappings
http://www.opcfoundation.org/UA/Part6/
OPC 10000-7, OPC Unified Architecture - Part 7: Profiles
http://www.opcfoundation.org/UA/Part7/
OPC 10000-8, OPC Unified Architecture - Part 8: Data Access
http://www.opcfoundation.org/UA/Part8/
OPC 10000-9, OPC Unified Architecture - Part 9: Alarms and Conditions
http://www.opcfoundation.org/UA/Part9/
OPC 10000-11, OPC Unified Architecture - Part 11: Historical Access
http://www.opcfoundation.org/UA/Part11/
OPC 10001-1, OPC Unified Architecture V1.04 - Amendment 1: AnalogItem Types
http://www.opcfoundation.org/UA/Amendment1/
OPC 10001-3, OPC Unified Architecture V1.04 - Amendment 3: Method Metadata
http://www.opcfoundation.org/UA/Amendment3/
OPC 10000-100, OPC Unified Architecture - Part 100: Devices
http://www.opcfoundation.org/UA/Part100/
OPC 40083: OPC UA interfaces for plastics and rubber machinery – General Type definitions (version 1.02)
http://www.opcfoundation.org/UA/PlasticsRubber/GeneralTypes
OPC 40084-1: OPC UA interfaces for plastics and rubber machinery – Extrusion – Part 1: General Type Definitions (version 1.0)
http://www.opcfoundation.org/UA/PlasticsRubber/Extrusion/GeneralTypes/